Commerce

CONSTRUCTION MATERIALS WAREHOUSE

  • Gypsum, gypsum adhesive, gypsum plaster;
  • Concrete additives, formwork oil;
  • Bricks;
  • Roof tiles;
  • Cement: grey, white;
  • Baumit mineral plaster: silicone, silica, granopor;
  • Façade paints, primer, latex paint - Baumit;
  • Waterproofing membranes and bitumen primer;
  • Tegola Canadese bitumen roof shingles, Italy;
  • Baumit thermal insulation system:
    • EPS, EPS-F, XPS styrofoam;
    • Thermal insulation adhesives and finish plasters;
    • Reinforcement meshes, dowels, profiles, etc.
  • Dry construction materials:
    • Gypsum plasterboards;
    • Metal profiles;
    • Accessories;
  • Adhesives for wall and floor tiles;
  • Liquid waterproofing for swimming pools, terraces, bathrooms, etc.;
  • Vertical and horizontal rainwater outlets for flat roofs;
  • VELUX roof windows and skylights;
  • Silicones, adhesives and assembly foam.

TIMBER STORAGE YARD:

  • Softwood:
    • Boards 2.5 cm – for formwork and clean;
    • Roof laths 2.5 cm / 3 cm, 3 cm / 4 cm, 3 cm / 5 cm;
    • Ribs 5 cm /10 cm, 6 cm / 12 cm, 7 cm / 13 cm;
    • Beams (formwork and roof) of sizes from 8 cm / 8 cm to 20 cm / 20 cm;
    • Boards and planks of thickness 3 cm – 7 cm;
    • Scaffolding planks
  • Plywood:
    • Plain – beech, poplar of thickness 4 mm, 6 mm, 8 mm, 10 mm, 12 mm;
    • Waterproof:
      • Bulgarian-made: thickness 12 mm, 15 mm, 18 mm, 21 mm;
      • Chinese-made: black and brown colour; 18 mm, 21 mm;
  • Pressboard, pressboard sheets and OSB panels;
  • Wooden girders: double T profile  – Н20/L = 2.5-6 m and solid wood beams; glued wood beams and ribs;

Impregnation of timber by immersion:

One of the best methods for impregnating wooden beams, planks, boards, slats, stakes, etc. is immersing them in a bath of impregnating solution.

The bathtub is made of steel, with dimensions of 1.5/5.3/1.5m.

It is equipped with an electrified hydraulic mechanism for pressing and dipping the palletized timber into the solution. The wooden material is arranged 5 mm in the transverse direction in rows with dividing strips on each row in height. The package prepared in this way is tightened with palletizing strips, after which it is placed on the dipping mechanism of the tub with a forklift. Through the hydraulic system of the tub, the package is pressed and dips in the bath. This process is maximally effective, because the impregnating solution penetrates evenly over the entire surrounding surface of the wood left submerged for 30 to 60 minutes. After lifting and draining from the solution, the pallet is stacked in the covered warehouse for drying under natural ventilation. Impralit ® IT is the preservative for wooden constructions, used according to the presented technology, with excellent action against wood eaters, blueing, molds and wood-destroying fungi.

Impralit ® IT provides exceptional wood protection as well as safety for people and the environment: completely devoid of heavy metals, it guarantees not only exceptional results, but also a high degree of safety during processing. The action of Impralit ® IT has been tested and fully meets the requirements for implementation and control of construction activity.

FERROUS METAL PRODUCTS STORAGE YARD:

  • Reinforcement bars: coil ø 6,5; ø 8; ø 10; rod from No 8 to No 28.
  • Welded wire fabric reinforcement of wire thickness from ø 4 to ø 12 mm and overall sizes 2 m x 4/5/6 m.
  • Cold rolled sheet; Hot rolled sheet; Chequered sheet; Expanded grating
  • Galvanized steel sheet; Trapezoidal steel sheet.
  • Rolled profiles in steel 3: round bars; equal angles; flat bars; square bars; double T profile.
  • U profile: from No 5 to No 35 to DIN, GOST and Bulgarian State Standard.
  • Double T profile: from No 10 to No 45 to DIN, GOST and Bulgarian State Standard.
  • Carbon steel pipes: welded and seamless.
  • Steel electric welded pipes of square, rectangular and complex profile, from 15x15 mm to 150x150 mm.
  • Galvanized pipes, from ½″ to 3″.
  • Hot rolled bends and fittings for carbon pipes.
  • Electrodes, wires, carboflex cutting discs, strip steel (16х0,5), etc.
  • Nails: for construction, steel (hardened) and for upholstery.
  • Wire nets: fencing nets – knitted; welded (galvanized) of various wire thickness and mesh sizes; façade reinforcement panel (ø 1.8 x 1m x 2m, galvanized); rabitz wire mesh; chicken wire, screens, etc.

NON-FERROUS METAL PRODUCTS STORAGE YARD:

  1. COPPER
    • Copper sheet:
      • Rolls – 0.5 (0.55) x 1000 mm, ½Н-
      • Sheets - 0.5/0.55/0.8/1/1.2/1.5/2/3/4/5/ x 1000 x 2000;
    • Copper flat bars: 20/25/30/40/50/60/80/100 x 3/4/5/6/8/10;
    • Copper wire; copper nails, copper pipe fittings, solders;
    • Copper pipes (flexible – in rolls, rigid – straight lengths from 3 to 5 m);
  2. BRASS
    • Brass sheet: thickness from 0.5 to 4 mm x 1000 x 2000;
    • Brass rods – diameter (ø); hexogen, hollow, square;
    • Brass flat bars; brass pipes, brass welding wire;

FORMWORK COMPONENTS AND SCAFFOLDINGS STORAGE YARD:

  1. FORMWORK – walls, columns and slabs (horizontal sections)
    • Three-ply wood formwork panels;
    • Metallic panels;
    • Telescopic supports;
    • Studs, nuts, tripods and other formwork components;
    • Bini Fernando vertical lightweight formwork (walls and columns)
      • Tie rods – from 15 to 100 cm, spaces at 5 cm, reinforcing profile, etc.
  2. SCAFFOLDING
    • Façade frame scaffolding;
    • Components for façade tubular scaffolding: tubes, clamps, couplers, etc.
  3. FOR RENT –  all components for tubular scaffolding and formwork can be rented at much reasonable conditions.

Contacts: Stara Zagora, Voivoda Stoino Chernogorski Str. 27A , +359 42 603 642, office@nikonbg.com